Information ATC communication information on 787 Dreamline 10

[1885133 (Emanuele Vaccarella)]

Hello community
does anyone know how to enable and synchronize the ATC frequencies (tuning panel control) on the 787 Dreamlianer 10 with the Vpilot?
Example: if the LSGG tower frequency in the Vpilot is 120.805, and I switch it in the 787 tuning panel control, I have no audio in the headset - even worse the panel control writes the frequency 120.800 instead of 120.805. for your information I fly with a virtual reality headset in case it would have an impact.
my flight software is PREPAR3D 4.
thank you for your help and patience (I recently started Vatsim)
Greetings to all Emanuele

[870618 (Sean Harrison)]

I suspect that you have the QW 787, so my comment is that I believe this is more a QW thing than a pilot client. Ross will hopefully explain it.

[1277383 (Marcelo Barretto)]

VATSIM 8.33 kHz Frequencies Trial

[VATSIM_Trial] Starting on September 7, a trial with 8.33 kHz frequency spacing will take place in Germany, the Netherlands and the UK. The trial will run for a maximum of 3 months (likely shorter). What is 8.33 kHz Spacing Reducing the spacing between consecutive frequencies to 8.33 kHz adds two additional channels for every 25 kHz. This means that the difficulties some divisions and subdivisions have had with reduced frequency availability, which often caused conflicts with neighbouring f…

120.805 is an 8.33 kHz spacing frequency. Follow the information here on how to work around simulator/aircraft limtations on tuning these frequencies

[861112 (Torben Andersen)]

Have you tried using the VPilot command “.com1 120.805”?

[1885133 (Emanuele Vaccarella)]

Hello Marcello
Thanks for your informations
Emanuele

[1885133 (Emanuele Vaccarella)]

Hello Sean
Thanks for your informations
Emanuele